Display

The Display on the BedBike displays time, speed and distance. Please read Instructions section on how to operate the Display.

  • Speed: Your pedaling speed
  • Dist: Distance 
  • Time: Time spend exercising
  • Scan: Automatic change of modes
  • Alarm: >30 km/h (slow down)

Instructions

Press the button to change between modes.

Press the button and hold to initiate 5 seconds to reset. 

The display enters sleep mode when inactive for 5 minutes and resets.

The backlit is engaged when you start exercising. 

Use an appropriate battery AA 3.6 V

Change the battery when the digits start to fade. 

Changing The Battery

The battery is located in the bottom of 

the carrying handle. It can be changed 

by tightening the knob fully (Clockwise)

and flipping the battery case, which is held in place by a magnet, out of the carrying handle.

Li-ion 3.6V, 2400mAh, type AA is the long 

lasting original battery and is recommended.

(Batteries can be purchased separately here)

Cleaning

You can disinfect the Lemco BedBike with disinfectant wipes. 

The pedals can be cleaned with a humid cloth and soap.

Do not wipe the screen with Alcohol or wet wipes. 

 

Operating

The resistance lever can be operated from the top of the BedBike from level zero to four.

Level Zero: least resistance.

Level Four: most resistance. 

The BedBike is designed for up to 40 Watt 

and might overheat if you exercise 

above maximum for a longer period. 

Let the exerciser cool for 30 minutes 

in case it feels overheated. 

Attachment

Turning the knob clockwise tightens the grip 

and anti-clockwise to loosen the grip.

Our innovative grip attaches easily to 

most Hospital bed frames, even care-beds 

and Dialysis chairs.

Make sure to tighten the knob firmly to ensure 

stability when exercising.

For Your Safety

Before you start exercising please consult your therapist or doctor to insure you are fit to use this exerciser and have the correct training program. Excessive exercise may result in serious damage to your health or cause death. Should you feel dizzy or weak, stop the training immediately and call a doctor.

Keep hands, loose clothes, scarf etc. clear of moving parts on the BedBike during use. This is also applicable for assistants or helpers when you use the exerciser. Keep away from small children. Children below 15 years of age are not allowed to use the BedBike exerciser without adult supervision.

Specifications

  • Warranty Professional: 1 Year
  • Warranty Home Use: 1+2 years
  • Maximum User Weight: 120 kg
  • Display: Time, Distance, Speed
  • Battery: Li-ion 3.6V, 2400mAh, type AA, non-rechargeable.
  • Weight: 9.3 kg
  • CE: Sporting Device EN957
  • Magnetic Resistance: 4 Levels

Recycle

Do not throw the battery into the trash.

Environment

Lemco BedBike is designed for indoor use only.

  • Temperature: 15°C – 35°C.
  • Humidity: 40% – 60% RH, non-condensing.
  • Pressure: 960 hPa – 1060 hPa.
  • IP Classification: IP22

Storage & transport.

  • Temperature: 5°C – 35°C.
  • Humidity: 40% – 60% RH, non-condensing.
  • Pressure: 700 hPa – 1060 hPa.
  • EMC: IEC 60601-1-2

Do not place the exerciser in direct sunlight, discoloration might occur.

Disclaimers

Damage to the BedBike by not following the manuals instructions results in void of warranty.

The BedBike is designed for Hospital beds, Dialysis chairs and care-beds. 

Lemco-Mobility cannot be held responsible for any damages caused to beds or chairs.

Lemco-Mobility cannot be held responsible if you do not follow the manual and cause injury to self or others while using the BedBike.

The BedBike is not a spinning exerciser and is not to be used as one. 

The BedBike may only be used according to therapist or doctor’s Instructions.

Only use original Lemco-Mobility parts. Un-original parts results in a void of warranty.

Using the BedBike for unintended purposes results in a void of warranty.

It is prohibited to self-repair on the Lemco BedBike without guidance from Lemco.

Lemco-Mobility cannot be held responsible for damage caused by wrongful use of the exerciser. 

Inventor, Manufacturer and Designer

LEMCO MOBILITY

Fabriksvej 3 – DK-3000 Helsingør

Tlf: +45 3325 4002

info@lemco-mobility.com